What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 27.06.2025 16:27
a photo is worth a thousand words.
He then describes the function of a fuse.
This device then solves the entire problem.
Checkers Sweep Laval to Earn Trip to Calder Cup Finals - Charlotte Checkers Hockey
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This is where this question deviates from being a 'generic' question, and becomes more specific.
In schematic diagrams this is the symbol for a fuse:
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
It also is a device that limits the change in current flow.
A circuit breaker is similar, but is resettable.
I can not sleep. what is the problem?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
How terrible are we at making future predictions of like technology?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
(Dc diagram shown, AC is similar).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
It seems Mohan does not understand the difference between a comment and an Answer.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is where the MOV conducts again, and dissipated the energy.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Upvotes:
One
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–10[John johnson John Johnson ]
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Now when you have a certain ac resistance, then a current flows in a loop.
At one ohm, the resistor has a maximum of 1 watt power.
At least they know the answer if they wanted it.
There are three different concepts here that are getting confused.
The third is lightning and “how it gets conducted into a home.”
Edit 2024–10.
but this device (an Inductor) … impedes the rapid changes in the current.
but I think this circuit , shows a few more pieces.
The bolt then partially travels down the line to your home.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Whitesides says budget proposal shows the administration does not value NASA science - SpaceNews
For this case there are devices called Metal oxide varistors (MOV).
The MOV will conduct when the voltage exceeds 50% of line voltage.
Here is a simplified AC power diagram.
Has any man licked his wife's vagina while another man had sex with her?
[old diagram got deleted by accident]
This is the picture of an electronic coil of wire wound around a core of magnetic material.
What does a fuse do?
Top Cardiovascular Researcher Sounds Alarm Over Current Heart Health Guidelines - SciTechDaily
He then describes Rainy Season and Lightning.
What is lightning?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
He then asserts :
[image of Common-mode choke]
There are two important concepts here.
2024–10–14 [Omar Gharbi Omar Gharbi ]
An AC voltage/ current source, and an ac inductive load.
First Sentence:
nine
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
But it can get overloaded, and no longer works.
Barnstars:
Because the load is inductive, the current lags the voltage.(by a bit).
I post the exact comment here.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is 'the assistant's answer'
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
eight
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This one hit behind the barn.
The other is “what does a “fuse” do?”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–10–16 [ OO OLAOYE OYEBODE ]
what exactly is a ‘surge’ protector?
One is “what exactly is in a ‘surge protector’ ? ”
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
so, what happens?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
But… the neutral is now “floating” because of the 1 ohm resistance.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
the problem then depends on "how fast does the fuse operate?".
A fuse is a non-resetable over current circuit protector.
These devices are installed between the “hot” and “neutral” and protective ground.